Star Trac E-UB Installation Instructions Manual page 37

Step 25.
Next, plug-in the heart rate cable from the neck
into the heart rate board connector on the dis-
play.
Step 27.
Plug the center console ground cable into the
quick disconnect tab on the display mount.
50
Step 26.
Plug back the Heart rate ground cable into the
quick disconnect tab on the display mount.
Step 28.
Assemble the front and back display parts to-
gether by sliding the bottom of the front display
under the 2 tabs at the base first, then pressing
front display against the back cover.
Caution: Be careful not to pinch any wires.
2
1
620-7922 Rev B