Table of Contents
Advertisement
3
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
7
Touch [Up/Down (Forward) Adj.] or [Up/Down (Rear) Adj.] to select (Forward) or (Rear) for the
adjustment.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 (down) to +127 (up), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
3-70
Adjustment
CS665 Pro
Advertisement
Table of Contents
