Table of Contents
Advertisement
3
6
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -20 (forward) to +20 (backward), 1 step = 0.1 mm
7
Fold the output sheet in two on the center to the direction of paper feed and check misalignment (a) of
the stapling center position.
8
If the test desired result cannot be obtained, touch [ADJUSTMENT] tab. Repeat the adjustment steps
from 3 to 7 until the desired result is obtained.
9
Touch [Return] to restore the Adjustment Menu Screen.
3-20
[1]
a
[2]
Adjustment
CS665 Pro
Advertisement
Table of Contents
