Table of Contents
Advertisement
3
7
Check that the pasting on the body set starts in proper position.
8
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
9
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 (early) to +127 (late), 1 step = 0.1 mm
10
Repeat the adjustment steps from 3 to 9 until the desired result is obtained.
11
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
!
Detail
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific
paper size is selected, adjustment value will be the sum of the entered value and the value previously
specified for "All Size".
3-72
Start position of backward pasting
Body pages
Start position of frontward pasting
Adjustment
CS665 Pro
Advertisement
Table of Contents
