Table of Contents
Advertisement
3
7
Display the required size key using up/down arrow keys, and touch it.
8
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -400 (wide) to +400 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
If adjustment in any other size is required, repeat steps 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
Note
Enter the value so that the cover should be cut more than 2.0 mm.
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific
paper size is selected, adjustment value will be the sum of the entered value and the value previously
specified for "All Size".
3-62
Adjustment
CS665 Pro
Advertisement
Table of Contents
