Table of Contents
Advertisement
7
4
Check that the X coordinate and Y coordinate displayed in the first line of the message area fall within
the standard value displayed in the second line.
–
If the coordinates fall out of the range of the standard value, repeat the adjustment procedure or
contact your service representative.
5
Touch each Check Button at the upper left and lower right corners on the screen to check if the buzzer
tone functions normally.
–
If the buzzer tone does not sound, repeat the adjustment procedure or contact your service
representative.
6
Press [0] on the control panel keypad to complete the setting.
–
To cancel the change, press [1] on the control panel keypad.
In either case, the Utility Menu Screen will be restored.
7-4
Touch screen adjustment
CS665 Pro
Advertisement
Table of Contents
