Table of Contents
Advertisement
Adjustment
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
If adjustment in any other size is required, repeat steps from 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
CS665 Pro
3
3-95
Advertisement
Table of Contents
