Table of Contents
Advertisement
4
Setting Item/Description
03 Printer Adjustment
Adjust the settings related to printing.
•
•
•
•
•
•
•
04 Finisher Adjustment
Adjust the settings related to the finisher.
4-16
Restart Timing Adjustment: -60 to +60 (1 step = 0.1mm)
Centering Adjustment: -40 to +40 (1 step = 0.1mm)
FD-Mag. Adjustment: -100 to +100 (1 step = 0.01%)
CD-Mag. Adjustment: -100 to +100 (1 step = 0.01%)
Lead Edge Erase Adjustment: -20 to +40 (1 step = 0.1mm)
Registration Loop Adj.: -99 to +99 (1 step = 0.1mm)
Pre-registration Adj.: -99 to +99 (1 step = 0.1mm)
01 Stapler Position Adj.
Adjust the settings related to the Finisher FS-521.
•
Staple Center Position: -20 to +20 (1 step = 0.1mm)
•
Paper Width (staple): -20 to +20 (1 step = 0.1mm)
•
Paper Width (straight): -20 to +20 (1 step = 0.1mm)
•
Exit Guide Center Adj.: -50 to +50 (1 step = 0.1mm)
•
Exit Guide Paper Width: -50 to +50 (1 step = 0.1mm)
02 Multi Folder (Punch) Adj.
Adjust the settings related to the punch function of the Fold-
ing Unit FD-503.
•
Paper Width Adjustment: -20 to +20 (1 step = 0.1mm)
•
Hole-Punch Vertical Pos.:
2-Hole Punch -40 to +40 (1 step = 0.1mm)
4-Hole Punch -40 to +40 (1 step = 0.1mm)
03 Multi Folder (Fold) Adj.
Adjust the settings related to the folding function of the Fold-
ing Unit FD-503.
•
Half Fold Position Adj.: -50 to +50 (1 step = 0.1mm)
•
Tri-Fold-in Pos. Adj.: -50 to +50 (1 step = 0.1mm)
•
Tri-Fold-out Pos. Adj.: -50 to +50 (1 step = 0.1mm)
•
Double Parallel Pos. Adj.: -50 to +50 (1 step = 0.1mm)
•
Z-Fold Position Adj.: -50 to +50 (1 step = 0.1mm)
•
Gate Fold Position Adj.: -50 to +50 (1 step = 0.1mm)
05 Stacker Adjustment
Adjust the settings related to the Large Capacity Stacker LS-
505.
•
Paper Width Adjustment: -20 to +20 (1 step = 0.1mm)
•
Paper Length Adjustment: -20 to +20 (1 step = 0.1mm)
06 Saddle Stitcher Adj.
Adjust the settings related to the Saddle Stitcher SD-506.
•
Staple Center Adj.: -20 to +20 (1 step = 0.1mm)
•
Staple Paper Width Adj.: -20 to +20 (1 step = 0.1mm)
•
Staple Pitch Adjustment: -20 to +20 (1 step = 0.1mm)
•
Half Fold Position Adj.: -50 to +50 (1 step = 0.1mm)
•
Tri-Fold Position Adj.: -50 to +50 (1 step = 0.1mm)
•
Fold Paper Width Adj.: -50 to +50 (1 step = 0.1mm)
•
Trimming Adjustment:-400 to +400 (1 step = 0.1mm)
•
Trimmer Receiver Adj.: Trimmer Count, Move Pitch, Ex-
ecute Compulsive Movement
07 RU Adjustment
Adjust the settings related to the Relay Unit RU-504.
Curl Reform Direction: Off/ Upper/ Lower
Utility screen outlines
Default
Off
CS665 Pro
Advertisement
Table of Contents
