Table of Contents
Advertisement
6
7
Display the required item using up/down arrow keys, and touch it.
8
Touch [+ <--> -] to specify the value to be positive or negative.
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -99 to +99, 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Printer Adjustment Menu Screen.
11
If further changes are required, touch the desired key.
6-28
Machine administrator setting
CS665 Pro
Advertisement
Table of Contents
