Table of Contents
Advertisement
3
7
Touch the required size key.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 (left) to +127 (right), 1 step = 0.1 mm
–
If specified value is positive, the folding positions move to the right. Or, if negative value is specified,
the folding positions move to the left.
9
Repeat steps 3 to 8 until the desired result is obtained.
10
If adjustment in any other size is required, repeat steps 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
3-98
Adjustment
CS665 Pro
Advertisement
Table of Contents
