Table of Contents
Advertisement
Adjustment
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 to +127, 1 step = 0.1 mm
–
When misalignment (a) of step 5 has occurred, enter the "+" value.
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
If adjustment in any other size is required, repeat steps 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
CS665 Pro
3
3-89
Advertisement
Table of Contents
