Table of Contents
Advertisement
3
6
Check that the edge of the right cover page is neatly aligned with that of the left cover page.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 (short) to +127 (long), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
3-66
Left cover page
Right cover page
Trimming position
Adjustment
CS665 Pro
Advertisement
Table of Contents
