Table of Contents
Advertisement
3
6
Check whether any misalignment or paper buckling has occurred. Misalignment may occur if the paper
width setting is larger than the actual width, and paper may become buckled if the paper width setting
is smaller than the actual width.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Paper Width (Straight) Screen will be restored.
8
Display the required size key using up/down arrow keys, and touch it.
9
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
10
Remove the output paper, and close the Finisher door.
11
If the test desired result cannot be obtained, touch [ADJUSTMENT] tab. Repeat the adjustment steps
from 3 to 10 until the desired result is obtained.
12
Touch [Return] to restore the Adjustment Menu Screen.
3-24
a
b
Adjustment
CS665 Pro
Advertisement
Table of Contents
