Table of Contents
Advertisement
3
5
Check misalignment (a) of the folded line and stapling position.
6
If the test desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Staple Center Adjustment Screen will be restored.
7
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -50 (forward) to +50 (backward), 1 step = 0.1 mm
8
Repeat the adjustment steps from 3 to 7 until the desired result is obtained.
9
Touch [Return] to restore the Adjustment Menu Screen.
3-50
[1]
a
[2]
Adjustment
CS665 Pro
Advertisement
Table of Contents
