Table of Contents
Advertisement
3
7
Display the required size key using up/down arrow keys, and touch it.
8
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Adjustment Menu Screen.
Note
If the setting is too wide, the center position of punch holes may dislocate. If the setting is too narrow,
the position of punch holes may vary.
3-30
Adjustment
CS665 Pro
Advertisement
Table of Contents
