Making Calls In The Team/Executive/Secretary; Configuration; Lines; Line Utilization - Siemens HiPath 2000 User Manual

Making calls in the team/executive/secretary configuration
Step by Step
142
Making calls in the team/
executive/secretary

configuration

If configured (consult your service personnel), you belong
to a team of subscribers with multiple lines (multi-line
page 14). Your phone features trunk keys (MULAP
keys) page 143.

Lines

A distinction is made between primary and secondary
lines. Each of these line types can be used on a private
or shared basis page 142.
Primary line
All multi-line telephones have a primary line. This line
can be reached in the usual manner via your public
phone number. Incoming calls are signaled on this line.
Secondary line
The secondary line on your phone is used as a primary
line by another subscriber. Your primary line, which is
configured on another telephone, simultaneously func-
tions as the secondary line on that telephone.

Line utilization

Private line
A line that is used by a single telephone. This line can-
not be used as a secondary line by another telephone.
Shared line
A line that is configured on multiple telephones. The
line status (if configured) is displayed for all telephones
that share this line. If, for example, a shared line is being
used by a telephone, a status message indicating that
this line is busy is displayed on all other telephones.
Direct call line
A line with a direct connection to another telephone.
You can see the status of the line from the LED.