Communicating With Pc Applications Over A Csta Interface - Siemens HiPath 2000 User Manual

Step by Step
e 0
,
Communicating with PC applications
over a CSTA interface
If configured (contact your service personnel), you can
use your phone to communicate with PC applications
(CSTA = Computer Supported Telecommunications
Applications). You send information to the application
and receive information from the application,
for example, via your phone display.
S
Press the "Data I/O" key, key programming
j
Enter the three-digit ID for the application you wish to
control.
9
... Use the TouchGuide and the keypad for communication
with the application.
Temporarily interrupting communication with the
application
^
The phone is ringing. You answer the call.
T
The LED on the "Data I/O" key flashes: Communication
to the application is automatically interrupted.
Resuming communication with the application
T
Press the flashing "Data I/O" key. The LED lights up.
Ending communication with the application
Select and confirm the relevant CSTA message.
or
^ \
Lift the handset and replace it again.
More functions/services
page 91.
139