Data Backup To Usb Memory Stick - Siemens HiPath 2000 User Manual

Step by Step
Backup/Restore

Data backup to USB memory stick

You can save your OpenStage 60/60 G/80/80 G user
settings and personal phonebook entries as files on a
USB memory stick and download (restore) all or, where
applicable, selected data to your or another
OpenStage 60/60 G/80/80 G.
Every backup is given a separate name and is pass-
word-protected. Setting the password encrypts the
content of the backup. Data can only be restored after
entering the password set.
Backup scope
• Entries and referenced data (e.g. image) from the
personal phonebook
• Call list entries
• User menu settings
• Screensavers
• Photos
• Ringtones
• Call forwarding instructions with default destina-
tions
The settings must be enabled for your phone.
Connecting a USB memory stick
Use a USB extension cable to connect the
USB memory stick to the USB master port on the un-
derside of the phone
sage appears briefly.
The phone returns to idle mode after a few seconds and
you can start to back up/restore your data
page 193.
The following steps are only necessary if you respond
to the pop-up menu before the automatic timeout.
Confirm.
j
if nec.
Enter and confirm the user password.
You can remove the USB memory stick by simply pull-
ing it out.
Data backup to USB memory stick
page 39
page 162
page 82
page 16. The following mes-
New USB detected
page 37
page 42
page 192,
191