Direct Station Selection Key; Using Dss Keys To Answer Calls; Calling A Team Member Directly - Siemens HiPath 2000 User Manual

Making calls in the team/executive/secretary configuration
Step by Step
146

Direct station selection key

Your phone features a programmable sensor key config-
ured for direct station selection for every team member.
Meaning of LED displays on DSS keys
LED
S
T
R
[1] In this manual, flashing sensor keys are identified by this icon, re-
gardless of the flashing interval. The flashing interval represents
different statuses, which are described in detail in the correspond-
ing sections of the manual.

Using DSS keys to answer calls

Prerequisite: Your telephone rings or the DSS key
flashes.
T
if nec.
Press the flashing DSS key.
^
Lift the handset.
or
n
Press the key shown.

Calling a team member directly

S
Press the DSS key.
or
R
If the team member you wish to reach is engaged in an-
other call, the DSS key on your telephone is lit. You can
still make the call in this case.
^
Lift the handset.
or Speakerphone mode.
Meaning of function key
Off Team party not on a call.
Quickly: I am being called, please
accept.
[1]
Flashing
Slowly: Another party is being
called and has not yet answered.
On Team party is on a call or has activat-
ed DND.