On-Hook Dialing - Siemens HiPath 2000 User Manual

Step by Step

On-hook dialing

j
Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
Your system may also be programmed so that
you have to press the "internal" key before you
dial an internal number.
To call an external party, you have to enter an ex-
ternal code before dialing the party's telephone
number (Prime Line is not active; contact your
service personnel).
Pay attention to the notes on voice encryption
page 113.
The other party answers with speaker:
^
Lift the handset.
or On-hook dialing: Speakerphone mode.
The called party does not answer or is busy:
n
Press the key shown. The LED goes out.
Basic functions
51