Siemens HiPath 2000 User Manual page 149

Step by Step
Forward Line: Off
Making calls in the team/executive/secretary configuration
Deactivating call forwarding
v
Open the Program/Service menu
Select and confirm the option shown.
S
Press the required trunk key.
or
j
Enter the required trunk number.
or
R
If available. Press the "CFW MULAP" key.
If you have activated call forwarding for a trunk, a
special dial tone sounds when the line is seized.
Understanding the LED displays on the sensor key
for "CFW MULAP"
S
The LED on the "CFW MULAP" key is off - call forward-
ing is not active for this trunk.
R
The LED on the "CFW MULAP" key lights up - call for-
warding is active for this trunk.
T
The LED on the "CFW MULAP" key is flashing slowly,
the trunk is the call forwarding destination.
page 42.
149