Accepting A Call For Another Member Of Your Team; Ringing Group - Siemens HiPath 2000 User Manual

Step by Step
Pickup - group
Destinations g
Ringing group on
Ringing group off
Accepting a call for another member of
your team
You can use your own telephone to accept calls for oth-
er telephones in your team, even while engaged in an
ongoing call. To do this, contact your service personnel
to find out if a pickup group has been configured.
Prerequisite: Your telephone rings briefly. "Call for:" ap-
pears on the upper display line with the station number/
name of the originator; the station number/name of the
caller appears on the lower line.
Select and confirm the option shown.

Ringing group

You can have calls for your telephone signaled audibly at
up to five other internal phones. The phone that an-
swers the call first receives the call.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)
Saving, displaying, and deleting telephones for the
ringing group
v
Open the Program/Service menu
Confirm.
Select and confirm the option shown
Follow the display prompts (enter the internal station
number).
If your phone belongs to a ringing group, your
display will show the station number or the name
of the originator on the upper line and that of the
caller on the lower line.
Removing all telephones in a call ringing group
c
Open the idle menu
Select and confirm the option shown.
[1] "Differing display view in a HiPath 4000 environment"
page 159!
page 30.
Using team functions
page 42.
[1]
.
page 196
153