Table of Contents
Advertisement
!
2-2
Connecting the chiller
•
Mount the Flow Meter and Temperature Gauge assembly on a wall in a
horizontal position.
Cl The Flow Meter and Temperature Gauge assembly must
be mounted horizontal or the Flow Meter will not function
properly.
•
Connect the hose from the "Water in from Chiller" to the flow meter.
Return
to chiller
(1" ID)
•
Connect another hose from the temperature gauge to the "Closed Loop
In".
•
Connect the hose from the "Closed Loop Out" to the "Water out to
Chiller".
Continued on next page
Bleed Valve
1/2" NPT
internal taper
thread
Overflow
Bucket
Temp
guage
94MS42 Rev.B1 S/W Ver 2.06
Mount
Assembly
on wall
Flow
From
chiller
meter
(for 1" ID
hose)
Advertisement
Table of Contents
