11-8
Replacing Light Block Springs
•
For the lower light block, move upper exposure frame into the cabinet.
For the upper light block, move lower exposure frame into the cabinet.
•
Disconnect main power.
•
Remove the left and right side panels.
•
Remove the left mounting bracket first.
•
Use the new mounting bracket.
•
Insert two #8-32 x 0.62" screws and secure to mounting bracket with
two 8-32 kep nuts.
•
Use the
1
/
-13 x 2.0" shoulder screw and large
2
through the hole in the mounting bracket. Place the mandrel over the
shoulder screw.
•
Place left spring over mandrel.
•
Secure washer and nut over shoulder screw.
•
Reinstall left and right side panels and reconnect power.
1
/
" washer and insert
2
94MS42 Rev.B1 S/W Ver 2.06