!
2-2
Connecting the Chiller
Connecting Chiller to Printer:
•
Mount the Flow Meter and Temperature Gauge assembly on a wall in
the upright position.
Cl The Flow Meter and Temperature Gauge assembly must
be mounted level or the Flow Meter will not function properly.
To chiller
1" ID
•
Connect the hose from the chiller outlet to the to the flow meter.
•
Connect another hose from the temperature gauge to the Closed Loop
inlet.
•
Connect the hose from the Closed Loop outlet to the chiller inlet.
Bleed Valve
1/2" NPT
internal taper
thread
Inlet
Outlet
Mount
Assembly
on wall
Overflow
Bucket
Flow
From chiller
Meter
Temperature
1" ID
Guage
94MS41 Rev. C1 S/W Ver. 2.06