Table of Contents
Advertisement
8-4
Tubing/Fitting Replacement
If a vacuum line or connection is cracked, loose, leaking or broken, replace
it as soon as possible. A faulty vacuum line or connection will greatly
increase the vacuum drawdown time required, if not eliminate full vacuum
altogether. All vacuum lines are separated from the connectors by pressing
down and holding the connection outer ring while pulling the vacuum
line out. To replace the vacuum line into the connections, simply push
the line all the way into the connection.
Vacuum Gauge Replacement
See section Nose Assembly.
94MS42 Rev. B1 S/W Ver 2.06
Advertisement
Table of Contents
