Table of Contents
Advertisement
3-2
U
MENU
This key is used as the autostep indicator and for the continuous vacuum
feature.
Note: U MENU Special Function
The U key has the optional function to be used to set auto-step and
continuous vacuum per memory in normal operating mode. The frame
control switch feature must be turned ON and the automatic vacuum
feature must be turned OFF. Press the U key the memory window will
read [ A C] and the exposure window will read [ A StP] . Press the V key to
turn auto-step function ON or OFF. Press the e key the memory window
will read [ A C] and the exposure window will read [ C UAC] . Press the V
key to turn continuous vacuum function ON or OFF.
m
MEASURE
This key is used to check the lamp intensity.
0 - 9
NUMERICAL KEYPAD
These keys are used to enter the vacuum time, exposure units, and to
access a particular memory location.
0 - 9
INSTANT MEMORY KEYPAD
The OV 45/33HD has 40 independent memory locations, the first ten of
which are on the lower section of the integrator for instant access. There
is a space provided to write down the application of these memories.
Simply press the lower 0 through 9 key that corresponds to the most
commonly used applications.
94MS42 Rev. B1 S/W Ver. 2.06
Advertisement
Table of Contents
