Recording Schedule; Specific Day - GeoVision GV-Compact DVR V2 User Manual

To start monitoring or recording:
•
Select START. The unit will start monitoring based on your above settings: record
immediately, only record on the scheduled time, or record by an input trigger.. –OR-
•
Select SAVE to save the monitoring settings. Then press the REC button on the Remote
Control at any time to start your monitoring settings.
Note: In the web-based configuration, you can further set different input devices to trigger and
stop monitoring separately. See 6.4 Monitoring.

4.5 Recording Schedule

The schedule is provided to activate recording and I/O monitoring on a specific time each day.

4.5.1 Specific Day

The system will operate automatically on the specific days you have scheduled. Press the
button on the Remote Control to start and then use the directional buttons to define the
days. For CHANNEL RECORDING and I/O MONITOR RECORDING, enable the desired
channel to record on the defined days.
To start the scheduled recording, you must set the monitoring mode to be SCHEDULE. See
4.4 Monitoring Settings.
40
Figure 4-23