iPECS eMG80 Installation Manual page 36

iPECS eMG80
Hardware Description and Installation Manual
The following are included on the MBUAD:
4 CO Line interface circuits

8 DKT interface circuits

4 SLT interface circuits

1 External Relay contact for LBC or general purpose

1 Alarm detection circuit, External Page port, and External MOH port

Internal MOH (13 music resources)

Built-in VoIP channels (default 2 channels, maximum 8 channels with license)

Built-in VM channel (default 2 channels, maximum 4 channels with license)

Master Clock Generation & PLL circuit

1 PFT circuit [CO1 connects to the last SLT port (STA12)]

1 RS-232C Interface circuit

1 LAN Interface & USB interface circuit

PCM Voice Processing circuit (ACT2 - ASIC, voice switching, including DSP)

- PCM Tone Generation and PCM Gain Control
- Tone (DTMF/CPT/FAX) detection and CID Signal (FSK/DTMF/RUS CID)
detection
Figure 4.5.2-1 MBUAD
29
Issue 1.0