System Overview; Ipecs Emg80 System Highlights; General Cabinet Description - iPECS eMG80 Installation Manual

iPECS eMG80
Hardware Description and Installation Manual
2. S
YSTEM OVERVIEW

2.1 iPECS eMG80 System Highlights

The eMG80 system employs a unique digital and IP converge architecture to deliver an
affordable, flexible powerful telecommunications platform for 8 to more than 100 phones that
is easy to install, manage and use. The eMG80 interfaces with analog CO lines, digital and
ISDN lines, and SIP trunks. For flexibility and ease of use, an array of user terminals are
available including proprietary digital and IP multi-button phones, as well as standard SLTs
and SIP phones. Also, terminals are available for mobility including DECT cordless and soft
clients for smart phones and laptops.
The system installs easily by inserting option boards to meet the customer configuration and
wiring with standard modular jacks. Web based management simplifies the admin process
locally or remotely and the Keyset admin is ideal for minor configuration changes desired by
the end-user.
The rich feature set spans all the basic features and functions of a modern communications
platform such as Transfer, Caller Id, MOH, etc. and delivers advanced functions including an
integrated multi-level Auto Attendant and Voice Mail with both mobile and E-mail notification.
In addition, the eMG80 is compatible with Ericsson-LG optional advanced communication
applications supporting TAPI, desktop softphones, Unified Communication, Call Center
operation and more.
In addition, the related manuals about UCS, Phontage, PMS, IPCR, CTI, and iPECS
Communicator(Android & iOS) are posted on our web site and also we provide each manual
with UC & Application products.

2.2 General Cabinet Description

The eMG80 system consists of a Key Service Unit (KSU) and, if required, an Expansion Key
Service Unit (EKSU). Each KSU consists of a plastic housing, a Main board and Power
Supply Unit as well as optional Interface and Function boards. In addition on the bottom of
each KSU are the connections from the KSU to the EKSU.
As shown in Figure 2.2-1, on the left side of the KSU are connections for Battery Backup, AC
Power and Earth Ground as well as a Power switch. On the right side are modular jack
connections for Stations, external networks (Analog CO, BRI, and PRI lines), a Miscellaneous
jack, a DB9 for the RS232 serial connection and LAN connections for Web Admin access and
SIP trunks,. In addition, a recessed reset button is located between the modular jacks for the
external networks and the miscellaneous modular jack.
The EKSU, shown in Figure 2.2-2, is similar to the KSU except that on the right side there are
no LAN or RS232 connector, and no reset button.
4
Issue 1.0