About This Manual - iPECS eMG80 Installation Manual

iPECS eMG80
Hardware Description and Installation Manual

1.2 About This Manual

This document provides general information covering the description and installation of the
iPECS eMG80 System hardware. While every effort has been taken to ensure the accuracy of
this information, Ericsson-LG makes no warranty of accuracy or interpretations thereof.
The document is divided into nine (9) sections as described in the following.
Section 1 Introduction
This section introduces important safety information and the manual.
Section 2 System Overview
Provides general information on the iPECS eMG80 System, including the system
specifications and capacity.
Section 3 Installation Overview
Describes detailed instructions for planning the installation site and procedures to install
the iPECS eMG80 System.
Section 4 Board Installation & Description
Provides a description and instructions for installing components of the iPECS eMG80.
Section 5 Mounting the KSU and EKSU
Provides instructions for mounting the KSU and EKSU.
Section 6 KSU and EKSU Wiring
Provides instructions on wiring the KSU and EKSU including Modular jacks for Lines,
stations, LAN ports, and Miscellaneous connections as well as Earth Grounding and
Battery Backup.
Section 7 Terminal Connections and Wiring
Describes the various terminals, maximum wiring distance, and other device connections
for the terminals.
Section 8 Starting the iPECS eMG80 System
This section provides general information for starting the System, assigning the Nation
code, and running the Installation Wizard.
Section 9 Maintenance & Troubleshooting
Provides information on maintenance the iPECS eMG80 System, replacing the PSU fuse
and deals with common troubleshooting issues.
Section 10 Open Source Software Notice
Provides information on open source software.
3
Issue 1.0