System Capacity - iPECS eMG80 Installation Manual

iPECS eMG80
Hardware Description and Installation Manual

2.5.2 System Capacity

Three System Capacity charts are provided below. These include the General System
Maximum Capacities Table 2.5.2-1, the capacity based on the MBU type Table 2.5.2-2 to
Table 2.5.2-5. Note that the maximums are not simultaneously achievable. However, the
maximum number of VoIP channels is separate from other external network and station
maximums. That is, up to 16 VoIP channels are available in addition to CO, BRI and PRI
Lines. Also, the 48 DECT stations are separate from other station maximums.
Item
CO/Trunk lines
Stations
Attendants
LAN port
Modem Channel
Serial Port(RS-232C)
USB(2.0) Host port
Alarm/Doorbell input
External Control Relays
Music Source Inputs
Power Fail Circuit
VSF Device 1: Built-in AA/VM
w/MEMU
VSF Device 2 (VVMU)
Conference channels
WTIB
DECT Phones
Built-in VoIP channels
VVMU VoIP channels
IP Stations and SIP Trunks
External Page
Internal Page
System Speed Dial
System Speed Dial Zones (Groups)
Station Speed Dial
Last Number Redial
Table 2.5.2-1 General System Capacities
Max. 74
Max. 140
4
2(1 each, KSU and VVMU)
1(MODU)
1
1
2 (1 per KSU)
2 (1 per KSU)
1 Internal: select one of 13 melodies
1 External source input
5 SLT ports
3 VSF announcements
Max. 6 (1 per KSU, EKSU, CH204, CH408, CS416)
4 channels(2 Chan. by default, 2 Chan. by license), 1 hour
15 hours(no license needed)
4 channels and 15 hours(by license), 1 hour(by default)
148, 3-13 party or unlimited 3-party
1
48
8(2 channels by default, 6 channels by license)
8(by license)
48 port (32 Stations+16 SIP Trunks)
1 port
35 zones
3000 numbers, 23 digits each
10 zones
100 per station, 23 digits each
(max. 4000 numbers)
10 numbers, 23 digits each
Capacity
10
Issue 1.0