Installation Overview; Pre-Installation Guidelines; Safety Installation Instructions; Installation Precautions - iPECS eMG80 Installation Manual

iPECS eMG80
Hardware Description and Installation Manual
3. I
NSTALLATION OVERVIEW

3.1 Pre-Installation Guidelines

Prior to installation, please read the following guidelines concerning installation and
connection. Be sure to comply with applicable local regulations.

3.1.1 Safety Installation Instructions

When installing the telephone wiring, basic safety precautions, including those below,
should always be followed to reduce the risk of fire, electric shock and personal injury:

Never install the telephone wiring during a lightning storm.

Never install the telephone jack in wet locations unless the jack is specifically
designed for wet locations.

Never touch non-insulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.

Use caution when installing or modifying telephone lines.

Anti-static precautions should be taken during installation.

3.1.2 Installation precautions

The iPECS eMG80 KSUs are designed for desktop mounting, wall mounting or a free-
standing rack mounting. In no case should one cabinet be mounted on top of the other
when desktop mounting. Avoid installing in the following places:

In direct sunlight and hot, cold, or humid places. Temperature range = 0

Places where shocks or vibrations are frequent or strong.

Dusty places or places where water or oil may come into contact with the KSU or
wiring.

Near strong RF generating devices such as sewing machines or electric welders.

On or near computers, fax machines, or other office equipment, as well as
microwave ovens or air conditioners.

Do not obstruct the openings in cabinets of the iPECS eMG80.

Do not stack the optional service boards.
17
Issue 1.0
o o
C to 40 C.