Installing A Second Hard Drive; Figure 4-11 Installing A Secondary Hard Drive - Sun Microsystems Sun Blade 150 Getting Started Manual

Installing a Second Hard Drive

1. Power off the workstation, power off peripherals, disconnect cables, remove the
cover, and attach an antistatic wrist strap as described in "Preparing for
Installation" on page 36.
2. Lift upward on the hard drive tray latch while you pull the hard drive tray
ejection lever outward (
3. Disconnect the primary hard drive power cable and the primary hard drive data
cable from the existing hard drive (
Hard drive
tray latch
Hard drive
tray
A
C
Chassis
FIGURE 4-11
50 Sun Blade 150 Getting Started Guide • June 2002
FIGURE 4-11
Primary hard drive data cable
Ejection lever
Hard drive tray
Installing a Secondary Hard Drive
A).
FIGURE 4-11 B).
B
Primary hard drive power cable
D
Screw(4)
Secondary hard drive