Planning The Installation Process - Sun Microsystems Sun Blade 150 Getting Started Manual

Planning the Installation Process

Use the following flow chart as a process tool to assist you with installation of the
Sun Blade 150 workstation.
START
Unpack the workstation and familiarize yourself
with the workstation features.
Install optional
components?
Connect the workstation and external device
cables.
Power on the workstation.
Use the
preinstalled
version of
software?
Answer the Solaris software prompts.
READY TO WORK!
FIGURE 1-1
2 Sun Blade 150 Getting Started Guide • June 2002
"Unpacking the Workstation" on page 4.
Also see "Front Panel Overview" on page 5, and "Back Panel Overview"
on page 6.
Install
Yes
optional
components.
No
No Install
different
version.
Yes
Navigational Flow Chart for the Sun Blade 150 Workstation
See "Installing Optional Internal Hardware" on
page 43 to install DIMMs, graphic accelerators,
PCI cards, hard drives, diskette drives, or
CD-ROM/DVD-ROMs.
See "Cabling the Workstation" on page 8.
See "Powering On the Workstation" on page 10.
For instructions, refer to the documentation in the
Solaris Media Kit for you operating environment.
See "Setting Up Your Operating Environment" on page 13.
Also see "Getting Started With the Additional Preinstalled
Software" on page 19.