Removing Power To The Workstation - Sun Microsystems Sun Blade 150 Getting Started Manual
Hide thumbs
Also See for Sun Blade 150:
- Installation manual (20 pages) ,
- Installation manual (19 pages) ,
- Service manual (218 pages)
Table of Contents
Advertisement
Removing Power to the Workstation
Caution – Pressing the power switch does not remove all power from the
workstation; a small voltage remains in the power supply. To remove all power from
the workstation, you must disconnect the workstation power cord.
1. Unplug and remove the power cord for the workstation (
).
FIGURE 4-2
38
Sun Blade 150 Getting Started Guide • June 2002
Advertisement
Table of Contents
