Installing A Cd-Rom Or Dvd-Rom Drive; Figure 4-9 Pci Card Guide - Sun Microsystems Sun Blade 150 Getting Started Manual

9. For long PCI cards or graphics accelerators, slide the adjustable PCI card guide
over the free end of the PCI card or graphics accelerator.
The adjustable PCI card guide is mounted on the side of the diskette drive bracket
(
FIGURE 4-9
accelerators.
PCI card or graphics accelerator board
FIGURE 4-9
10. Continue with "Finishing Component Installation" on page 53.

Installing a CD-ROM or DVD-ROM Drive

1. Power off the workstation, power off peripherals, disconnect cables, remove the
cover, and attach an antistatic wrist strap as described in "Preparing for
Installation" on page 36.
Note – Before installing a new CD-ROM or DVD-ROM drive, ensure that the
jumpers for the drive are correctly positioned. If necessary, refer to the Sun Blade 150
Service Manual (816-4379).
48 Sun Blade 150 Getting Started Guide • June 2002
). This guide provides support for long PCI cards and graphics
PCI Card Guide
Adjustable PCI card guide