Sun Microsystems Sun Blade 150 Getting Started Manual page 30

Tip – To help answer the setup prompts, your system administrator (SA) should
provide you with information specific to your site before you begin. Some of the
information may be in a JumpStart
Use a copy of
setting up the Solaris operating environment.
TABLE 2-1
Setup Window
Select Language Asks for the native language to use for the workstation.
Host Name Asks for the name to give the workstation.
Network Asks whether the workstation is on a network.
Connectivity
Note: Depending on how you answer and what information is
(IP Address) provided by your network, you may also be prompted for the
workstation's IP address.
Name Service Asks which name service to use: NIS+, NIS, DNS, or None.
Note: This window is not displayed if the workstation is not
connected to a network.
Domain Name Asks for the domain where the workstation resides.
Note: This window is not displayed if the workstation is not
connected to a network.
Name Server/ Asks for the name server (specify the server or have the
Subnet/ workstation find one on a local subnet).
Subnet Mask
Note: This window is not displayed if the workstation is not
connected to a network.
Note: Depending on how you answer and what information is
provided by your network, you may also be prompted for:
- Subnet (Asks whether the workstation is on a subnet.)
- Subnet Mask (Asks for subnet mask for the workstation's
subnet.)
Time Zone Asks for local time zone (select by geographic region, GMT
offset, or a time zone file).
14 Sun Blade 150 Getting Started Guide • June 2002
to write down the information you must collect before
TABLE 2-1
Information Needed to Set Up the Solaris Desktop Operating Environment
Explanation and Notes
™
profile on your network—check with your SA.
Your Information