Alarm Device Setup - iCanTek iCanView 222 User Manual

iCanView222 User's Guide

5.8. Alarm Device Setup

Test the alarm output and describe the condition of alarm annunciation.
Sub Field
Field/Button
/Button
Alarm Device
Test
Sound Test
Alarm Device
Active
Name
Condition
Sensor
Figure 5-10. Alarm Output Setup
Test alarm devices. Click on On/Off for testing
Small box with white background indicates the status of the
relay by On/Off.
ON On the alarm output (close the relay contact)
OFF Off the alarm output (Open the relay contact)
-
Setup the condition of activating alarm device. Select sensor or
motion detection as the condition.
Logical name of the alarm device can be input into the box at
the left.
Check at the box at the left of to allow alarm generation upon
Description
Rev.1.0 (Mar. 2008)
41