Alarm Device Setup - iCanTek iCanView 110 User Manual

iCanView110/110W User's Guide

5.8. Alarm Device Setup

Test alarm output and describe the condition of alarm.
Figure 5-10. Alarm Output Setup
Alarm Device Test : Test alarm devices. Press On/Off for testing.
Alarm Device Active Condition : Setup the condition of activating alarm Device. Select sensor
or motion detection as the condition.
- Duration : Set the duration of Alarm out.
10 sec, 30 sec, 1 min, 2 min, 5 min, 10 min, 30 min, 1 hour.
Rev.1.4 (Jan. 2005)
38 of 56