iCanTek iCanView 222 User Manual page 37

iCanView222 User's Guide
/Button
Administrator
Username
Administrator
password :
Administrator
Confirm
Password
Add User
Username
Add User
Password
User
Administration
Add User
Attribute
User List
Authentication YES
for Viewing SAVE
Admin ID. Default ID is "root"
Admin password. The default password is "dw2001".
Enter the password once more to confirm the password.
Enter the user ID you want to add. Up to 100 users are
supported by iCanView222.
Enter the user password.
You can set different system resource access capabilities for
each of the users.
Attributes are Audio, Bi-directional Audio and Pan/Tilt
control.
For example, if you want a specified user to hear the
audio from the iCanView222, check Audio in the check
box.
You can list "user ids" and " their attributes" here.
format : user id[A, BA, P] :
A – audio,
B – bi-directional audio,
P – pt(Pan/Tilt), attribute.
You can delete specific user by clicking the DELETE button.
If you want to restrict viewing access to the iCanView222, check
at the box left to Yes and click on Save. Users need to input ID
and password to connect to iCanView222 in viewing mode in a
pop up window as shown below..
Figure 5-8. User Authentication in iCanView222
Rev.1.0 (Mar. 2008)
37