iCanTek iCanView 222 User Manual page 2

iCanView222 User's Guide
iCanView222 is designed for indoor use only. When using iCanView222 outdoors or in an
environment that exceeds the limited range, you must separately use a water-resistant case.
Be careful not to cause any physical damage by dropping or throwing the iCanView222.
Especially keep the device out of reach from children.
Do not disassemble iCanView222. You will be excluded from After Service when disassembled.
Use only the power adapter provided with the iCanView222.
If you would like to use the iCanView222 for security, monitoring, please check the legal
regulations within the country.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generate, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures :
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into and outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
Directions
Note
Rev.1.0 (Mar. 2008)
2