Connecting To Xdsl/Cable Modem - iCanTek iCanView 222 User Manual

iCanView222 User's Guide
address (local IP address). If you only plan to access multiple units from within a local area
network, you do not need to change the RTSP and HTTP port numbers, unless other IP sharing
devices sit in-between the client and the IP video products. For more detailed information
regarding the use of IP sharing device refer to the document
IP-sharing-device].

3.2. Connecting to xDSL/Cable Modem

1. Follow through steps 1 to 3 in Section 2.5 to assign IP address and other network parameters to
iCanView222.
2. Install iCanView222 and connect it to xDSL or Cable modem as in Figure 3-2.
Figure 3-2. Connecting the iCanView222 to ADSL Modem
When fixed IP address is assigned to the xDSL or Cable modem, follow the same way as
assigning IP address for the case of LAN using IP-installer. To enable the notification of the
changed IP address to the user over e-mail when the IP address is changed in floating IP
environment, you have to assign the e-mail address when user name and password are
[Use of Private IP network using
②
Rev.1.0 (Mar. 2008)
18