iCanTek iCanView 222 User Manual page 16

iCanView222 User's Guide
Connectors Function
LINE-
Audio in
In/MIC
Audio out for
Line Out
speaker
Connecting
SENS IN
Alarm Sensor
Connecting
RLY OUT
annunciating
100Base-T Network
802.3af connection
Analog Video
CVBS OUT
output
6. Remote video connection to iCanView222
Run i-NVR on your PC. Before connecting to iCanView222 it is needed to configure the
connection information on the i-NVR. More detailed information of using "i-NVR" can be
found in [i-NVR User's
Connect microphone or output from
audio devices.
Audio from remote site is available
from this connector in bi-directional
audio mode. Connect speaker with
amplifier.
IR sensor,
Detector...
Alarm
Siren, Flashing Light, ...
device
Connect iCanView222 to the network,
LAN, ADSL or Cable modem.
Composite
camera module.
Guide].
Signal description
Motion Sensor,
video output from
Rev.1.0 (Mar. 2008)
Number
1
1
Smoke
1
1
1
the
1
16