iCanTek iCanView 222 User Manual page 56

iCanView222 User's Guide
Rotate the screen by 180 degree.
Connect to iCanView222.
Stop the connection.
Contrast,
adjustment..
Check the box to mute the audio.
Adjust the size of the screen. Normal
(x1), Twice (x2), Half (1/2), Full Screen
(full)
On/off the relay by pressing the button
Shows the status of the sensor. Blue
color means that the sensor is in normal
state, while red color indicates alarm
situation.
Number on the button indicates the
number of sensor.
Move the center of the camera in
up/down/left/right directions.
Zoom in (Z+)
Z+
Zoom out (Z-)
Z-
Not applicable for iCanView222.
Move the focus to further position.
F-
Not applicable for iCanView222.
Auto focus.
A/F
Not applicable for iCanView222.
Move the focus to nearer position.
F+
Not applicable for iCanView222.
Rev.1.0 (Mar. 2008)
Brightness, and Volume
56