iCanTek iCanView 222 User Manual page 44

iCanView222 User's Guide
Sub Field
Field/Button
/Button
Channel
Selection
Channel
Sensitivity
Region 1, 2,
or 3
Motion Region
Setup
START
END
SELECT
Percentage
RESET
SAVE
Not applicable.
Set the sensitivity in motion detection for each channel. 1 is the
most sensitive, and 10 is the least sensitive.
Set up to 3 the motion detection zone
Enable each zone by checking the box at the left of each Region.
. To set the region,
1. Click on START and click on a box overlaid on the
video
2. Click on END and click on a box overlaid on the video.
3. The defined motion detection zone will be indicated
with corresponding colors.
Legend of the color :
red(region 1),
green(region 2),
blue(region3).
Enable selection of rectangular zone start.
Enable selection of rectangular zone end.
Click on this button and click on desired rectangle to add or delete
the rectangular region to the motion detection zone.
This value controls the sensitivity of each region.
1 is the most sensitive and 100 is the least sensitive
Clears the start & end point to (0,0) & (0,0)
Save the setup parameters.
Description
Rev.1.0 (Mar. 2008)
44