Alarm Device Setup - iCanTek iCanView 240 User Manual

iCanView240/250 User's Guide

5.7. Alarm Device Setup

Test the alarm output and describe the condition of alarm annunciation.
Sensor related alarm operation, alarm device can operate only when the sensor is active at least over 2 seconds.
Sub Field
Field/Button
/Button
Alarm Device
Test
Sound Test
Alarm Device
Sensor
Active
Condition
Motion
Duration
Fig. 5-10 Alarm Device Setup
Test alarm devices. Click on On/Off for testing
Small box with white background indicates the status of the relay by
On/Off.
ON On the alarm output (close the relay contact)
OFF Off the alarm output (Open the relay contact)
Setup the condition of activating alarm device. Select sensor or motion
detection as the condition.
Name Logical name of the alarm device can be input into the box at the left.
Check at the box at the left of to allow alarm generation upon sensor
input.
Check at the box at the left to allow alarm generation upon Motion
detection
Set the duration of Alarm annunciation.
10 sec, 30 sec, 1 min, 2 min, 5 min, 10 min, 30 min, 1 hour.
Description
Rev.1.0 (Dec.2006) 39