iCanTek iCanView 222 User Manual page 40

iCanView222 User's Guide
Sensor
Select
Motion
Detection
Select
By E-Mail
Captured
Video
Transmission
By FTP
SAVE
detected from video channel
Check to enable Sensor initiated capture.
Check to enable motion detection initiated capture.
Select a way of sending captured video. You can send captured
video through FTP or E-mail, or both.
-
Check to send captured video by e-mail.
E-mail is sent to the Recv E-mail address. Refer to
5.3.]
Captured video data for E-mail consists of intra frames only in
consideration of the limited storage space for E-mail account.
FTP data contains entire video frames.
Check to send captured video by FTP.
FTP is sent to the FTP Server. Refer to
If the FTP server is not properly assigned in "Network
Configuration" mode,
transmission by FTP
Save the setup parameters.
[Section 5.3.]
iCanView222 ignores
Rev.1.0 (Mar. 2008)
[Section
the video
40