iCanTek iCanView 222 User Manual page 11

iCanView222 User's Guide
MIC /LINE IN : Connect external audio source or microphone. If external audio is connected,
embedded microphone will be disabled.
Use Standard stereo earphone jack for the connection
Figure 2-3. Pin assignment of the plug for MIC/LINE In (left) and
LINE OUT : Connect speakers with built in amplifier. Audio from remote site is output through
Line out in bi-directional audio mode.
Use Standard stereo earphone jack for the connection.
100BaseT 802.3af
- LINK LED : Continuous yellow light means that network cable is plugged in. It will flicker
when there is traffic.
- Status LED: Green color indicates that the camera is in normal operation mode, while RED
color indicates that the camera is in abnormal condition.
RS-232C
3 Pins on the right of the connector are assigned for
pin is numbered as 1.
Pin
1
2
3
4
5
DC7-23V: Power input of iCanView222.
Not used Not used
Ground Ground
Audio In Audio In
: 100Mbps Ethernet connector (RJ-45) with PoE standard (802.3af).
Description
Not used
Not used
RxD of RS-222C
TxD of RS-222C
Ground of RS-222C
Not used Not used
LINE OUT (right)
RS-222 port. Please note that leftmost
For debugging & factory use only.
For debugging & factory use only.
For debugging & factory use only.
Rev.1.0 (Mar. 2008)
Ground Ground
Audio out Audio out
Misc.
11