Sensor & Capture Setup - iCanTek iCanView 222 User Manual

iCanView222 User's Guide
5.7. Sensor & Capture Setup
This is the setup page for sensors and video capture conditions. Captured video can be sent to user
by FTP or E-mail upon configuration.
Sub Field
Field/Button
/Button
Sensor 1
Sensor Setup
Name
Video Capture
Condition
Figure 5-9. Sensor & Capture Setup
Select sensor type. There are two types of sensors which are
Normal Open and Normal Close.
Input logical name for the sensor.
It sets the condition of video transmission via FTP or E-mail.
The iCanView222 supports 2 types of conditions which are
mutually independent.
1. Sensor initiated: when at least one of the sensor
detects alarm condition.
2. Motion-Detection initiated : when motion is
Description
Rev.1.0 (Mar. 2008)
39